Type 5 Liquid Resistant Safey Coverall

Preparation of wearing Type 5 Liquid Resistant Safey Coverall ① preparation of medical personnel: all protective articles and articles required for diagnosis and treatment operation ② pre operation evaluation: isolation type, protective clothing and other protective articles are damaged ③ evaluation environment: clean area, potential pollution area, pollution area II. Operation process 1. Wearing protective articles 1 Preparation (cleaning area) (1) wash hands (2) wear a hat (3) wear a mask (medical protective mask) (4) wear work clothes (5) change work shoes (6) if the skin is damaged, wear a pair of gloves first 2. Wear protective clothes (potential pollution area) (7) enter the potential pollution area (8) select protective clothes of appropriate size, first wear clothes (9) and then wear a coat (10) wear a hat (11) zip up 3. Others (potentially polluted area) ⒀ wear protective goggles or face shield ⒀ wear gloves ⒂ wear shoe covers ⒂ wear second layer gloves to enter the polluted area ★ 2. Take off protective articles 1. Others (polluted area) (1) take off gloves and disinfect hands (2) take off protective goggles or face shield: pinch the side close to the head or ear, take it off and discard it in the medical waste container 2. Take off protective clothing (contaminated area) ⑶ take off the protective clothing, first pull the zipper to the bottom; (4) pull the hat up to make it separate from the head; (5) take off the sleeves; (6) take off the edge roll from top to bottom, face the pollution inward, take off all the protective clothing and put it into the medical waste container; (7) take off the shoe cover; (8) wash hands or disinfect hands. 3. Others (potential pollution area) ⑼ enter the potential pollution area ⑼ wash hands or disinfect hands ⒀ take off work clothes ⒀ take off medical protective masks ⒀ take off hats ⒂ wash hands or disinfect hands ⒂ enter the cleaning area ⒂ leave the cleaning area after bathing and changing clothes 3. Key points of wearing masks 1. First hold the headband every 2-4cm and put the metal nose forward. 2. Hold the mask in one hand and buckle it on the appropriate part of the face and the other hand Wear the mask belt at the appropriate position, and the lower fixed head belt crosses the head and is fixed at the back of the neck under both ears; The upper headband passes over the top of the head to fix it on the top of the back of the head. 3. Slowly press the fingertips of both hands along the metal strip of the bridge of the nose from the middle to both sides until they are close to the bridge of the nose. During this process, hands should not touch any part of the face. 4. Try to cover the mask with both hands and conduct positive and negative pressure tests. 5. Positive pressure test: cover the mask with both hands and exhale vigorously. If the air overflows from the edge of the mask, i.e. it is not worn properly, the headband and nose metal strip must be adjusted again; Negative pressure test: cover the mask with both hands and exhale vigorously. The center of the mask will sink. If air enters from the edge of the mask, it is improper to wear it. The headband and nose metal strip must be adjusted again. 4. Precautions 1 Protective clothing can only be worn and taken off in the specified area. 2. The removed protective articles shall be placed in the specified area. 3. In the contaminated area, patients should wear protective masks or comprehensive respiratory protectors for sputum suction, tracheotomy, endotracheal intubation and other operations.

II. Are protective clothing disposable

Medical protective clothing is disposable. Type 5 Liquid Resistant Safey Coverall has good moisture permeability and barrier, can effectively resist the penetration of alcohol, blood, body fluid, air dust particles and bacteria, is safe and convenient to use, can effectively protect the wearer from the threat of infection, is comfortable to wear, feels good, has strong tensile resistance, is breathable and waterproof, and has no cross infection.

Hot Tags: type 5 liquid resistant safey coverall, China, suppliers, manufacturers, factory