Blood Glucose Meter With Sampling Needle

The operation of the blood glucose meter with Sampling Needle is basically divided into five steps:

The first step: Turn on the power, one part is to press the power switch directly, and the other part is to directly insert the test paper to automatically turn on the machine.

The second step: coding adjustment. The coding adjustment methods of blood glucose meters are divided into the following three types:

⒈ Manually enter the test strip calibration code, such as Lisutan blood glucose meter, Johnson & Johnson blood glucose meter;

⒉ Insert the cipher chip into the machine to automatically record the test paper correction code.

⒊No coding, no need to manually or insert the chip, the instrument automatically recognizes.

The third step: blood collection and blood sucking: the blood can be collected directly with the blood sampling pen equipped with the blood glucose meter, and then the blood drops into the test paper. Most of the test paper is siphonic, and it will be directly sucked in when it is placed in the blood sucking area of the test paper.

Step 4: Display the result: After the blood sucking, a countdown will appear and the test result will be displayed. It ranges from five seconds to 30 seconds.

Step 5: Complete the test and shut down. The mainstream blood glucose meter automatically shuts down when the test strip is pulled out, and some early products also need to turn off the power button. Shutting down can reduce battery consumption and machine wear.

Test strip preservation

The test strips of blood glucose Meter with Sampling Needle are required to be placed in a dry, +10°C and +40°C temperature. Do not place it in the bathroom or kitchen, let alone store it in the refrigerator, as these places are extremely susceptible to moisture. If it has been put in the refrigerator, the sealed test paper tube needs to be slowly warmed up at room temperature before use, until it reaches room temperature. Do not remove the test paper before the test paper tube reaches room temperature to avoid the formation of condensed water in the test paper tube. Patients living in some relatively humid places (such as the south) should pay attention: every time a test strip is taken out, the sealing cover of the test strip tube should be closed immediately to prevent the test strip from getting wet; if you open a new tube of test strips, try to use it within three months; If possible, try to buy blood glucose test strips that are individually packaged.

Hot Tags: blood glucose meter with sampling needle, China, suppliers, manufacturers, factory