Use of Multifunction Medical Furniture Adjustable Bed defecation device: turn the defecation shaking handle clockwise, the defecation hole cover will open automatically, and the toilet carrier will be automatically sent to the patient's buttocks along the transverse direction. The patient can urinate or clean the lower part. Turn the defecation handle counterclockwise, the defecation hole cover will be closed and kept flush with the bed surface, and the defecation basin will be automatically sent to the operator's side for cleaning, Put the cleaned bedpan back into the bedpan carrier for next use. Use the guardrail of the nursing bed, hold the top edge of the side guardrail horizontally, lift it vertically by about 20mm, turn it down 180 degrees, and then put down the guardrail. After the patient goes to bed, lift and turn the guardrail up 180 degrees, and press it vertically to complete the lifting of the side guardrail.

Use of living table: align the opening of the plastic part on the back of the living table with the upper side of the side guardrail and press it down. Press the guardrail with one hand and lift the living table with the other hand to remove it. Use of infusion hanger: no matter the bed surface is in any state, the infusion rack can be used. When using the infusion rack, first screw the two sections of infusion racks into one, then align the hook under the infusion rack with the upper horizontal pipe, at the same time, align the upper hook head with the circular hole of the upper pipe of the side guardrail, press it down, and lift up the infusion hanger to remove it. Use of brake: when the brake is pressed with feet or hands, it is braking, and lifting is loosening.

Use of safety belt of Multifunction Medical Furniture Adjustable Bed: when the patient uses the bed or needs to change his position, he must fasten the safety belt, (the tightness of the safety belt shall be properly adjusted according to different individuals) to prevent danger. Operation of the foot washing device: when the bed surface of the foot position is horizontal, adjust the shaking handle of the thigh position and lift the bed surface of the thigh position to prevent the patient from slipping. Hold the foot position control handle, put the bed surface of the foot position in an appropriate position, turn down the foot position movable board, and then shake the shaking handle of the thigh position to keep the foot position movable board horizontal, Put on the basin and wash your feet. After washing your feet, take out the water basin and reset the foot position movable plate to its original position. Hold the foot position control handle tightly and lift the foot position bed surface upward to the horizontal position.

Hot Tags: multifunction medical furniture adjustable bed, China, suppliers, manufacturers, factory