Singing Tips And Precautions For Plaster Making

One pill and two oils, the plaster is thick, three up and three down, boiled down to remove the residue, dripping into beads, away from the fire, the pill matures, cold water underground, its shape is black like lacquer, hot is soft, cold is hard, paste It is sticky, and when it is pulled, it will rise. Technical essentials to be mastered for boiled plasters: 1. Do not use too much or not enough plaster. If it is not enough, the effect will be difficult to find. If it is too much, the viscosity of the plaster will be affected. 2. Pay attention to the temperature and dosage of the pill. Low temperature affects the combination of pill oil and its color is not luster. Large fires are flammable, but small amounts of pill will make the paste tender, and it will not be fixed when it is easily lost. If the amount of Dan is large, the paste will be old, brittle but not sticky, and easy to fall off. 3. The ancestor said: The black power of the plaster is boiling, and the bright power is stirring. After the pill is put down, it must be stirred continuously and stirred with a fan or fan to try to make the gas generated during the combination of the oil pellets escape, and the plaster will be bright and sticky.