Eye Protective Safety Goggles Glasses are an important part of personal protective equipment.The width and size of goggles shall be suitable for the user's face.Take off the glasses with both hands and handle them gently. If the glasses are placed temporarily, the convex surface of the lens shall be placed towards the front.If you don't wear glasses, please wrap them with glasses cloth and put them into the glasses box. Please avoid contact with insect repellents, toilet cleaning products, cosmetics, hair gel, drugs and other corrosive articles, otherwise the lenses and frames will deteriorate, deteriorate and change color.

If the lens is worn rough, worn, the frame is deformed, damaged, the screws are loose, the lens is easy to loose, and the frame is not tight or tight, it shall be adjusted in time. If the above phenomenon occurs, the deformation of the frame will burden the nose or ears and affect the vision of the wearer. It should be replaced in time. It is recommended to go to a professional store for plastic surgery and adjustment regularly.

The coated lens has high definition and can not contact organic solvents, oil, sweat acid, high temperature, chemicals and hard objects, otherwise it is easy to damage the lens film and affect the definition and beauty.

It is recommended not to use lenses with scratches, stains, cracks, etc., otherwise it will be unclear to see things due to light dispersion, resulting in vision loss.

Please do not place it under high temperature (above 60 ℃) for a long time. High temperature is easy to cause lens deformation or surface film cracks. Please do not place it in the front window of the cab or other places with direct sunlight or high temperature, so as not to damage the lens.

The metal mirror frame shall avoid contact with chemicals to prevent the coating from falling off and discoloration.

Prevent heavy fall and pressure, and prevent hard objects from rubbing lenses and masks.

Use a clean special wiping cloth. Be sure to hold the frame edge wire on one side of the wiping mirror with your hand and gently wipe the lens. Avoid damage to the frame or lens caused by excessive force.

Dry rubbing is easy to wear out the lens. It is recommended to wash it with clean water, absorb the water with a paper towel, and then wipe it with a special spectacle cloth. When the lens is very dirty, it is recommended to clean it with a low concentration of neutral lotion, and then rinse and dry it with clean water.

When the lens is attached with sweat stains, fruit juice, erupting agent (glue), cosmetics, etc., please wash and dry it with water immediately. If it dries naturally, the scale will become a stain, which is difficult to wipe clean and can't see clearly.

When the lens is wet by rain or sweat, please wipe it in one direction with a wiping cloth immediately.

Wear progressive multifocal lenses. Try not to use the edge of the lens to see things. Because there is a sense of distortion and ambiguity, use the lower part of the lens to see the near place. The adaptation method is also indoor first and then outdoor.

The filter and protective film of welding goggles shall be selected and replaced according to the specified operation needs.

Due to the prism of the lens, please drive and operate only when you are completely used to wearing glasses to see things. It is difficult to grasp the sense of distance for newly purchased glasses. Do not drive and operate until you are completely used to it.

The resin lens may be broken under strong impact, which is easy to cause eye and face damage. It is recommended not to use it during strenuous exercise.Don't look directly at the sun or strong light, otherwise you will hurt your eyes.Eye Protective Safety Goggles Glasses shall be used by special personnel to prevent infectious eye diseases

Hot Tags: eye protective safety goggles glasses, China, suppliers, manufacturers, factory