Infusion Syringe Pump

Infusion syringe pump is usually a mechanical or electronic control device, which controls the infusion speed by acting on the infusion catheter. It is often used in situations where the infusion volume and dosage need to be strictly controlled, such as the application of pressor drugs, antiarrhythmic drugs, intravenous infusion or intravenous anesthesia for infants and young children.

Preservation

When operating the infusion pump, do not touch the power plug with wet hands, and do not use it in direct sunlight or strong light. When in use, the sensor plug must be plugged tightly, otherwise it will not work normally. When not in use, it shall be placed on the seat at the top of the infusion pump to lock it, so as to avoid being damaged when moving and storing. When charging, turn off the power switch before charging. If the battery is used for the first time or reused after a long time of use, the battery shall be fully charged before use. It is forbidden to store the infusion pump where it is directly blown by cold and wet (hot) air flow such as fan, air conditioner, electric furnace, heater and humidifier.

Characteristic

The infusion pump can realize the following functions and features:

(l) It can accurately measure and control the infusion speed;

(2) It can accurately measure and control the infusion volume;

(3) It can report and replace abnormal conditions such as bubbles, empty liquid, liquid leakage and blockage of infusion pipe, and automatically cut off the infusion path;

(4) Color OLED display;

(5) Realize intelligent control of infusion.

This is a medical instrument that can operate and control the speed and time of drip according to the wishes of nurses when powered on. In biopharmaceutical development and chemical industry, for example, some liquid drug raw materials should be configured according to strict proportion. Now the most common is the configuration of test tube dropper. This method of configuration through human eyes has many disadvantages and great errors. It is difficult to grasp the composition proportion of drugs, so an instrument that can accurately measure the output liquid is needed

Usage:

1. Prepare the liquid medicine in the treatment room according to the doctor's advice, check the quality, deterioration, discoloration, turbidity, looseness of the bottle mouth and validity period, open it after it is correct, install cotton swabs for disinfection, suck the liquid medicine, add the medicine according to the principle of aseptic operation and mix it evenly. Indicate the name, bed number, name and dose of the added medicine on the bottle swab, and ask a second person to check it to assist the patient in taking a comfortable lying position.

2. Adjust the infusion speed and predetermined infusion volume according to the doctor's order (according to the 'selection' on the infusion pump panel).

3. Fasten the tourniquet, correctly select the blood vessel, loosen the tourniquet, disinfect the skin, wait to dry, prepare the infusion paste, fasten the tourniquet, disinfect the skin again, puncture and fix correctly (the same as the infusion operation procedure).

4. Record the drug, liquid volume and infusion speed in the infusion pump

Infusion syringe pump is an instrument that can accurately control the number of infusion drops or infusion flow rate, ensure that the drug can enter the patient's body at a uniform speed, accurately and safely, and play a role. At the same time, it is an intelligent infusion device. The infusion speed is not affected by human back pressure and operators. The infusion is accurate and reliable, which helps to reduce the intensity of clinical nursing work, Improve the accuracy, safety and nursing quality of infusion.

Hot Tags: infusion syringe pump, China, suppliers, manufacturers, factory