Precision Filtration Infusion Set For Pump

Pump infusion set is a medical product, which is used together with peristaltic pump in clinic for accurate and quantitative administration. For single use only.

Infusion purpose：

It is to supplement water, electrolyte and essential elements in the body, such as potassium ion and sodium ion, which is mainly for patients with diarrhea and so on;

It is to supplement nutrition and improve the body's disease resistance, such as protein and fat emulsion, which is mainly aimed at consumptive diseases, such as scald and tumor;

Is to cooperate with treatment, such as drug input;

It is first aid, expanding blood volume, improving microcirculation, such as massive hemorrhage, shock, etc.

Standard operation：

The medical staff will generally pump out the air when injecting the patient with the syringe. If there are some small bubbles, the air will rise when the liquid comes down during the injection. Generally, the air will not be pushed into the body

If a very small amount of bubbles enter the human body, there is generally no danger.

Of course, if a large amount of air enters the human body, it will cause pulmonary artery blockage, resulting in blood unable to enter the lungs for gas exchange, which will endanger human life.

When the general air enters the human body, it will react immediately, such as severe hypoxia such as chest tightness and Qi tightness.

Problems needing attention in infusion：

Infusion should go to regular medical institutions, because infusion needs certain sanitary conditions and environment. If infusion is carried out in other places, there are some unsafe factors.

Infusion should be kept in the infusion room. Do not go to the infusion room by yourself and leave the supervision of medical staff. In case of liquid seepage or liquid dripping, it can not be handled in time, resulting in some adverse consequences. In particular, some drugs may cause adverse reactions, which will be life-threatening if not handled in time.

The infusion process requires strict aseptic operation. The doctor's hands are disinfected. After a bottle of liquid is delivered, if it needs to be replaced, non professionals should not change it, because if it is not done well, in case of air entry, it will increase some unnecessary trouble; If bacteria are brought into the liquid, the consequences will be unimaginable.

During the infusion process, do not adjust the infusion speed by yourself. The infusion speed adjusted by medical staff during infusion is generally determined by comprehensive consideration according to the patient's condition, age, drug requirements and so on. Because some drugs need to be dropped slowly. If they are dropped too fast, it will not only affect the curative effect, but also increase the burden on the heart, and seriously cause heart failure, acute pulmonary edema and so on.

In the process of infusion, if there are small bubbles sticking in the leather tube, it means that air enters. Don't be nervous. Just ask professionals to handle the air in time.

After the infusion is finished and the needle is pulled out, press the disinfection cotton ball slightly above the puncture point by hand to stop bleeding for 3 ~ 5 min. do not press too hard to avoid pain.

Precision filtration infiltration set for pump is made of polyethylene, polypropylene, polyvinyl chloride, ABS resin and other materials. It is composed of drip pot, liquid pipeline, rolling clamp, infusion filter, silica gel section, joint, etc.

Hot Tags: precision filtration infusion set for pump, China, suppliers, manufacturers, factory,