Disabled People Elderly Folding Walker

In medicine, the tools that help the human body support weight, maintain balance and walk are called walking aids. Most of the people who use walking aids are disabled people,patients with hemiplegia, paraplegia, amputation or elderly people whose lower limb muscle strength is weakened and can not support weight. There are many kinds of walking aids on the market. Only selecting the appropriate walking aid can bring the greatest convenience to the user's life.

The four legged frame walking aid, with two handles and four supported walking aids, uses a frame structure and has high stability. It is mainly used for people with walking difficulties with sound upper limb function, poor lower limb muscle strength and poor balance ability, such as those who can't bear weight after lower limb injury or fracture. The height of the handrail can be kept horizontal with the greater rotor (the protrusion of the hip joint) through the adjustment of the telescopic rod of the four legged frame walker. Attention should be paid when using a four legged walker. Adjust the walker to a proper height, and the center of gravity shall not lean forward too much. The user must pick up the walker with both hands at the same time. The balance ability at the moment of standing is very important.

The differential frame type walking aid is a frame type walking aid with two handles and four feet, which is equipped with hinges and can travel alternately on one side. Because both sides of the differential frame walker can travel alternately, the travel speed is faster than the ordinary four legged frame walker, and the structure is less stable than the four legged frame walker. Since the differential frame walker is close to the normal gait when used, it is suitable for users with slightly poor upper limb muscle strength but certain balance ability, but not recommended for users with poor instantaneous standing balance. The hinge of the differential frame walker is fixed to form a four legged frame walker.

The stepped frame walker is a frame walker with two high and two low handles and four feet. The low handle is used to assist the user to stand up or sit down. Keep the height of the high handle of the stepped frame Walker horizontal with the greater rotor (the protrusion of the hip joint). When lifting and sitting, the walker shall be close to the seat to facilitate transfer.

Two wheel walker is a wheeled walker with two handles, two wheels and two feet. A fixed caster is installed in front of the two wheel walker, and the foot pad at the back has certain friction and anti-skid performance, which is easy to push and has good directionality. The operation of lifting the walker is omitted, and the user can move forward by pushing the walker. It is suitable for users with insufficient muscle strength and poor balance of upper limbs who are unable to lift the walker, such as the elderly. When using the two wheel walker, make the height of the walker handle level with the user's navel, adjust the height and be suitable for operation.

The frame type two wheel walker is a two wheel walker with two handles, two wheels and two feet in a frame structure. the performance of the frame type two wheel walker is basically the same as that of the two wheel walker. During use, the center of gravity of the body is closer to the walker, and the stability performance is better than that of the two wheel walker. It is suitable for the elderly to walk. The handle height of the frame type two wheel Walker should be kept horizontal with the large rotor (the protrusion of the hip joint).

Four wheel walker, a wheeled walker with two handles and four wheels. The purpose of four-wheel walker is the same as that of two-wheel walker, but the four-wheel walker is more flexible and can be used for faster walking speed. It is generally equipped with brake device and rest seat, which is suitable for outdoor use. Before use, adjust the height of the telescopic rod to make the position of the handle level with the user's navel. It can only be used if it has good balance ability because of its low stability. The handle handbrake of four-wheel walker can be used as driving brake. When the hand brake is pressed down, it can be used as the parking brake. Therefore, after the parking brake is lowered, the four-wheel walker can be used as the two-wheel walker.

The rear four-wheel walker is a wheeled walker with two handles and four wheels. The user is located in front of the walker and travels in a pulling manner. The performance of the rear four-wheel walker is similar to that of the four-wheel walker. The rear wheel has an anti retrogression device, but the use method is different. The user is located in front of the rear four-wheel Walker and moves forward by pulling. The rear four-wheel device is suitable for those with poor body posture, such as children with cerebral palsy. Children with cerebral palsy straighten their bodies when moving in a pulling way; For users with poor balance control ability and easy to lean back, the rear walker can provide corresponding support. When adjusting the rear four-wheel walker, the height of the handle needs to be adjusted according to the user's height to keep the greater rotor of the handle (the protrusion of the joint) in a horizontal position.

The frame type four-wheel walking（Disabled People Elderly Folding）aid is a wheel type walking aid with two handles and four wheels in a frame structure. The performance and use method of the four-wheel walker with frame structure are basically the same as that of the four-wheel walker. During use, the center of gravity of the body is closer to the walker, and the stability performance is better than that of the four-wheel walker. It is suitable for indoor and training. When braking is required, the walker can be pressed down with the strength of the upper limbs, that is, it can be braked.

Hot Tags: disabled people elderly folding walker, China, suppliers, manufacturers, factory